Discussion:
GPD Pocket (world's smallest higher-specs 7" laptop) dmesg
Add Reply
Joseph Mayer
2017-12-05 05:51:30 UTC
Reply
Permalink
Raw Message
Hi!

This laptop http://www.gpd.hk/pocket.asp works fine on OpenBSD 6.1 and 6.2, save for that the APM doesn't work - suspend doesn't work and the battery doesn't report right, or even charge, in OpenBSD, will follow up about that separately.

8GB RAM, 4x 2.56Ghz Atom x7-Z8750, 128GB eMMC, USB3, micro-HDMI,USBC-Displayport, 480 grams. Here is the dmesg for 6.1.

The biggest limits I see that there's no internal M.2 connector (for NVME/SATA SSD), and also there's only one USBC (USB3) and one USB3 connector.

This is with the 2017-06-28 "unlocked" BIOS which gives much more configurable BIOS options (and some self-bricking options due to manufacturer incompetence), more about that on Reddit.

Some OpenBSD people who know much more about hardware than me, said that the hardwired hardware configuration in this laptop is very good but I can't make any judgement about that.

Joseph

OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr 1 13:45:56 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 8477364224 (8084MB)
avail mem = 8215760896 (7835MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7b8f0000 (51 entries)
bios0: vendor American Megatrends Inc. version "5.11" date 06/28/2017
bios0: Default string Default string
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI SSDT HPET SSDT SSDT SSDT LPIT BCFG PRAM BGRT CSRT WDAT SSDT SSDT SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1600.26 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: TSC frequency 1600257000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1599.96 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1599.96 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1599.96 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpicpu0 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpicpu1 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpicpu2 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpicpu3 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: WWPR, resource for HS03, MDM1
acpipwrres2 at acpi0: WWPR, resource for HS13, MDM1
acpipwrres3 at acpi0: WWPR, resource for SSC1, MDM3
acpipwrres4 at acpi0: WWPR, resource for SSCW, MDM3
acpipwrres5 at acpi0: WWPR, resource for HSC1, MDM2
acpipwrres6 at acpi0: WWPR, resource for HSC3, MDM4
acpipwrres7 at acpi0: CLK3, resource for RTK1, RTKA
acpipwrres8 at acpi0: CLK4
acpipwrres9 at acpi0: CLK2, resource for NFC2
acpipwrres10 at acpi0: CLK1
acpipwrres11 at acpi0: CLK0, resource for CA10, CAM9, CAM3
acpipwrres12 at acpi0: CLK1, resource for CAM4
acpipwrres13 at acpi0: USBC, resource for XHC1, OTG1
acpipwrres14 at acpi0: P28X
acpipwrres15 at acpi0: P18X
acpipwrres16 at acpi0: P12X
acpipwrres17 at acpi0: P28P
acpipwrres18 at acpi0: P18P
acpipwrres19 at acpi0: P19X
acpipwrres20 at acpi0: P06X
acpipwrres21 at acpi0: P12A
acpipwrres22 at acpi0: P28T
acpipwrres23 at acpi0: P18D
acpipwrres24 at acpi0: P18T
acpipwrres25 at acpi0: P3P3
acpipwrres26 at acpi0: P12T
acpipwrres27 at acpi0: P28W
acpipwrres28 at acpi0: P18W
acpipwrres29 at acpi0: P12W
acpipwrres30 at acpi0: P33W
acpipwrres31 at acpi0: P33X
acpipwrres32 at acpi0: P4BW
acpitz0 at acpi0: critical temperature is 90 degC
"INT33A4" at acpi0 not configured
"INT33BD" at acpi0 not configured
chvgpio0 at acpi0: GPO1 uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins
chvgpio1 at acpi0: GPO3 uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins
dwiic0 at acpi0: I2C7 addr 0xa1a26000/0x1000 irq 38
iic0 at dwiic0
chvgpio2 at acpi0: GPO0 uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins
"INT34D3" at acpi0 not configured
dwiic1 at acpi0: I2C1 addr 0xa1a32000/0x1000 irq 32
iic1 at dwiic1
chvgpio3 at acpi0: GPO2 uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins
"INT33FE" at acpi0 not configured
"PNP0501" at acpi0 not configured
sdhc0 at acpi0: SDHA addr 0xa1a3a000/0x1000 irq 45
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
sdhc1 at acpi0: SDHB addr 0xa1a38000/0x1000 irq 46
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 4-bit, sd high-speed, mmc high-speed, dma
sdhc2 at acpi0: SHC1 addr 0xa1a36000/0x1000 irq 47, gpio
sdhc2: SDHC 3.0, 200 MHz base clock
sdmmc2 at sdhc2: 4-bit, sd high-speed, mmc high-speed, dma
"INTL9C60" at acpi0 not configured
"INTL9C60" at acpi0 not configured
"8086228A" at acpi0 not configured
"BCM2E7E" at acpi0 not configured
"8086228A" at acpi0 not configured
"8086228E" at acpi0 not configured
"8086228E" at acpi0 not configured
"8086228E" at acpi0 not configured
"MAX17047" at acpi0 not configured
dwiic2 at acpi0: I2C2 addr 0xa1a30000/0x1000 irq 33
iic2 at dwiic2
"10EC5645" at acpi0 not configured
dwiic3 at acpi0: I2C3 addr 0xa1a2e000/0x1000 irq 34
iic3 at dwiic3
dwiic4 at acpi0: I2C4 addr 0xa1a2c000/0x1000 irq 35
iic4 at dwiic4
dwiic5 at acpi0: I2C5 addr 0xa1a2a000/0x1000 irq 36
iic5 at dwiic5
dwiic6 at acpi0: I2C6 addr 0xa1a28000/0x1000 irq 37
iic6 at dwiic6
"GDIX1001" at acpi0 not configured
"808622A8" at acpi0 not configured
"INT33D5" at acpi0 not configured
acpibtn0 at acpi0: LID0
"FAN02501" at acpi0 not configured
acpibtn1 at acpi0: PWRB
chvgpio4 at acpi0: GPO4 uid 5
"ACPI0011" at acpi0 not configured
"ACPI000C" at acpi0 not configured
acpiac0 at acpi0: AC unit online
"INT3400" at acpi0 not configured
"INT3407" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3409" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"USBC000" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x34
"Intel HD Graphics" rev 0x34 at pci0 dev 2 function 0 not configured
"Intel Braswell Power" rev 0x34 at pci0 dev 11 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x34: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell TXE" rev 0x34 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x34: msi
pci1 at ppb0 bus 1
vendor "Broadcom", unknown product 0x43ec (class network subclass miscellaneous, rev 0x02) at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x34
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb0 at mainbus0: 1200x1920, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sdmmc1: can't enable card
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Samsung, DJNB4R, 0000> SCSI2 0/direct removable
sd0: 119276MB, 512 bytes/sector, 244277248 sectors
uhidev0 at uhub0 port 2 configuration 1 interface 0 "SINO WEALTH Gaming Keyboard" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "SINO WEALTH Gaming Keyboard" rev 1.10/1.00 addr 2
uhidev1: iclass 3/0, 39 report ids
uhid0 at uhidev1 reportid 5: input=0, output=0, feature=5
ums0 at uhidev1 reportid 35: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid1 at uhidev1 reportid 37: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 38: input=6, output=0, feature=0
uhid3 at uhidev1 reportid 39: input=1, output=0, feature=0
ugen0 at uhub0 port 3 "Broadcom Corp BCM2045A0" rev 2.00/1.12 addr 3
uhidev2 at uhub0 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/2.09 addr 4
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub0 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/2.09 addr 4
uhidev3: iclass 3/1, 2 report ids
uhid4 at uhidev3 reportid 1: input=6, output=0, feature=0
uhid5 at uhidev3 reportid 2: input=1, output=0, feature=0
vscsi0 at root
s
Joseph Mayer
2017-12-05 06:00:48 UTC
Reply
Permalink
Raw Message
(Sigh, I see Proton Mail made a weird encoding. Hope I fixed this by setting "Composer Mode" to "plaintext" in the settings.)

Hi!

This laptop http://www.gpd.hk/pocket.asp works fine on OpenBSD 6.1 and 6.2, save for that the APM doesn't work - suspend doesn't work and the battery doesn't report right, or even charge, in OpenBSD, will follow up about that separately.

8GB RAM, 4x 2.56Ghz Atom x7-Z8750, 128GB eMMC, USB3, micro-HDMI,USBC-Displayport, 480 grams. Here is the dmesg for 6.1.

The biggest limits I see that there's no internal M.2 connector (for NVME/SATA SSD), and also there's only one USBC (USB3) and one USB3 connector.

This is with the 2017-06-28 "unlocked" BIOS which gives much more configurable BIOS options (and some self-bricking options due to manufacturer incompetence), more about that on Reddit.

Some OpenBSD people who know much more about hardware than me, said that the hardwired hardware configuration in this laptop is very good but I can't make any judgement about that.

Joseph


OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr 1 13:45:56 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 8477364224 (8084MB)
avail mem = 8215760896 (7835MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7b8f0000 (51 entries)
bios0: vendor American Megatrends Inc. version "5.11" date 06/28/2017
bios0: Default string Default string
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI SSDT HPET SSDT SSDT SSDT LPIT BCFG PRAM BGRT CSRT WDAT SSDT SSDT SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1600.26 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: TSC frequency 1600257000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1599.96 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1599.96 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Atom(TM) x7-Z8750 CPU @ 1.60GHz, 1599.96 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpicpu0 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpicpu1 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpicpu2 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpicpu3 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(***@1 mwait.1), PSS
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: WWPR, resource for HS03, MDM1
acpipwrres2 at acpi0: WWPR, resource for HS13, MDM1
acpipwrres3 at acpi0: WWPR, resource for SSC1, MDM3
acpipwrres4 at acpi0: WWPR, resource for SSCW, MDM3
acpipwrres5 at acpi0: WWPR, resource for HSC1, MDM2
acpipwrres6 at acpi0: WWPR, resource for HSC3, MDM4
acpipwrres7 at acpi0: CLK3, resource for RTK1, RTKA
acpipwrres8 at acpi0: CLK4
acpipwrres9 at acpi0: CLK2, resource for NFC2
acpipwrres10 at acpi0: CLK1
acpipwrres11 at acpi0: CLK0, resource for CA10, CAM9, CAM3
acpipwrres12 at acpi0: CLK1, resource for CAM4
acpipwrres13 at acpi0: USBC, resource for XHC1, OTG1
acpipwrres14 at acpi0: P28X
acpipwrres15 at acpi0: P18X
acpipwrres16 at acpi0: P12X
acpipwrres17 at acpi0: P28P
acpipwrres18 at acpi0: P18P
acpipwrres19 at acpi0: P19X
acpipwrres20 at acpi0: P06X
acpipwrres21 at acpi0: P12A
acpipwrres22 at acpi0: P28T
acpipwrres23 at acpi0: P18D
acpipwrres24 at acpi0: P18T
acpipwrres25 at acpi0: P3P3
acpipwrres26 at acpi0: P12T
acpipwrres27 at acpi0: P28W
acpipwrres28 at acpi0: P18W
acpipwrres29 at acpi0: P12W
acpipwrres30 at acpi0: P33W
acpipwrres31 at acpi0: P33X
acpipwrres32 at acpi0: P4BW
acpitz0 at acpi0: critical temperature is 90 degC
"INT33A4" at acpi0 not configured
"INT33BD" at acpi0 not configured
chvgpio0 at acpi0: GPO1 uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins
chvgpio1 at acpi0: GPO3 uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins
dwiic0 at acpi0: I2C7 addr 0xa1a26000/0x1000 irq 38
iic0 at dwiic0
chvgpio2 at acpi0: GPO0 uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins
"INT34D3" at acpi0 not configured
dwiic1 at acpi0: I2C1 addr 0xa1a32000/0x1000 irq 32
iic1 at dwiic1
chvgpio3 at acpi0: GPO2 uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins
"INT33FE" at acpi0 not configured
"PNP0501" at acpi0 not configured
sdhc0 at acpi0: SDHA addr 0xa1a3a000/0x1000 irq 45
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
sdhc1 at acpi0: SDHB addr 0xa1a38000/0x1000 irq 46
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 4-bit, sd high-speed, mmc high-speed, dma
sdhc2 at acpi0: SHC1 addr 0xa1a36000/0x1000 irq 47, gpio
sdhc2: SDHC 3.0, 200 MHz base clock
sdmmc2 at sdhc2: 4-bit, sd high-speed, mmc high-speed, dma
"INTL9C60" at acpi0 not configured
"INTL9C60" at acpi0 not configured
"8086228A" at acpi0 not configured
"BCM2E7E" at acpi0 not configured
"8086228A" at acpi0 not configured
"8086228E" at acpi0 not configured
"8086228E" at acpi0 not configured
"8086228E" at acpi0 not configured
"MAX17047" at acpi0 not configured
dwiic2 at acpi0: I2C2 addr 0xa1a30000/0x1000 irq 33
iic2 at dwiic2
"10EC5645" at acpi0 not configured
dwiic3 at acpi0: I2C3 addr 0xa1a2e000/0x1000 irq 34
iic3 at dwiic3
dwiic4 at acpi0: I2C4 addr 0xa1a2c000/0x1000 irq 35
iic4 at dwiic4
dwiic5 at acpi0: I2C5 addr 0xa1a2a000/0x1000 irq 36
iic5 at dwiic5
dwiic6 at acpi0: I2C6 addr 0xa1a28000/0x1000 irq 37
iic6 at dwiic6
"GDIX1001" at acpi0 not configured
"808622A8" at acpi0 not configured
"INT33D5" at acpi0 not configured
acpibtn0 at acpi0: LID0
"FAN02501" at acpi0 not configured
acpibtn1 at acpi0: PWRB
chvgpio4 at acpi0: GPO4 uid 5
"ACPI0011" at acpi0 not configured
"ACPI000C" at acpi0 not configured
acpiac0 at acpi0: AC unit online
"INT3400" at acpi0 not configured
"INT3407" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3409" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"USBC000" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x34
"Intel HD Graphics" rev 0x34 at pci0 dev 2 function 0 not configured
"Intel Braswell Power" rev 0x34 at pci0 dev 11 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x34: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell TXE" rev 0x34 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x34: msi
pci1 at ppb0 bus 1
vendor "Broadcom", unknown product 0x43ec (class network subclass miscellaneous, rev 0x02) at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x34
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb0 at mainbus0: 1200x1920, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sdmmc1: can't enable card
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Samsung, DJNB4R, 0000> SCSI2 0/direct removable
sd0: 119276MB, 512 bytes/sector, 244277248 sectors
uhidev0 at uhub0 port 2 configuration 1 interface 0 "SINO WEALTH Gaming Keyboard" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "SINO WEALTH Gaming Keyboard" rev 1.10/1.00 addr 2
uhidev1: iclass 3/0, 39 report ids
uhid0 at uhidev1 reportid 5: input=0, output=0, feature=5
ums0 at uhidev1 reportid 35: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid1 at uhidev1 reportid 37: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 38: input=6, output=0, feature=0
uhid3 at uhidev1 reportid 39: input=1, output=0, feature=0
ugen0 at uhub0 port 3 "Broadcom Corp BCM2045A0" rev 2.00/1.12 addr 3
uhidev2 at uhub0 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/2.09 addr 4
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub0 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/2.09 addr 4
uhidev3: iclass 3/1, 2 report ids
uhid4 at uhidev3 reportid 1: input=6, output=0, feature=0
uhid5 at uhidev3 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
Mike Larkin
2017-12-05 07:24:04 UTC
Reply
Permalink
Raw Message
Post by Joseph Mayer
(Sigh, I see Proton Mail made a weird encoding. Hope I fixed this by setting "Composer Mode" to "plaintext" in the settings.)
Hi!
This laptop http://www.gpd.hk/pocket.asp works fine on OpenBSD 6.1 and 6.2, save for that the APM doesn't work - suspend doesn't work and the battery doesn't report right, or even charge, in OpenBSD, will follow up about that separately.
8GB RAM, 4x 2.56Ghz Atom x7-Z8750, 128GB eMMC, USB3, micro-HDMI,USBC-Displayport, 480 grams. Here is the dmesg for 6.1.
The biggest limits I see that there's no internal M.2 connector (for NVME/SATA SSD), and also there's only one USBC (USB3) and one USB3 connector.
This is with the 2017-06-28 "unlocked" BIOS which gives much more configurable BIOS options (and some self-bricking options due to manufacturer incompetence), more about that on Reddit.
Some OpenBSD people who know much more about hardware than me, said that the hardwired hardware configuration in this laptop is very good but I can't make any judgement about that.
Joseph
You should try a -current snapshot. I think kettenis@ fixed a few things on
these types of machines recently.

You still won't be able to suspend though, since this machine lacks S3. (Likely
it does suspend via S0ix transitions). And I don't think S4 (hibernate) will
work either since I'm pretty sure nobody has written a side-effect free sdmmc(4)
I/O routine yet. But some of the other devices may be implemented now, in
-current.

-ml
Post by Joseph Mayer
OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr 1 13:45:56 MDT 2017
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 8477364224 (8084MB)
avail mem = 8215760896 (7835MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0: vendor American Megatrends Inc. version "5.11" date 06/28/2017
bios0: Default string Default string
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI SSDT HPET SSDT SSDT SSDT LPIT BCFG PRAM BGRT CSRT WDAT SSDT SSDT SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: TSC frequency 1600257000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpicpu0 at acpi0
C2: state 6: substate 8 >= num 3
acpicpu1 at acpi0
C2: state 6: substate 8 >= num 3
acpicpu2 at acpi0
C2: state 6: substate 8 >= num 3
acpicpu3 at acpi0
C2: state 6: substate 8 >= num 3
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: WWPR, resource for HS03, MDM1
acpipwrres2 at acpi0: WWPR, resource for HS13, MDM1
acpipwrres3 at acpi0: WWPR, resource for SSC1, MDM3
acpipwrres4 at acpi0: WWPR, resource for SSCW, MDM3
acpipwrres5 at acpi0: WWPR, resource for HSC1, MDM2
acpipwrres6 at acpi0: WWPR, resource for HSC3, MDM4
acpipwrres7 at acpi0: CLK3, resource for RTK1, RTKA
acpipwrres8 at acpi0: CLK4
acpipwrres9 at acpi0: CLK2, resource for NFC2
acpipwrres10 at acpi0: CLK1
acpipwrres11 at acpi0: CLK0, resource for CA10, CAM9, CAM3
acpipwrres12 at acpi0: CLK1, resource for CAM4
acpipwrres13 at acpi0: USBC, resource for XHC1, OTG1
acpipwrres14 at acpi0: P28X
acpipwrres15 at acpi0: P18X
acpipwrres16 at acpi0: P12X
acpipwrres17 at acpi0: P28P
acpipwrres18 at acpi0: P18P
acpipwrres19 at acpi0: P19X
acpipwrres20 at acpi0: P06X
acpipwrres21 at acpi0: P12A
acpipwrres22 at acpi0: P28T
acpipwrres23 at acpi0: P18D
acpipwrres24 at acpi0: P18T
acpipwrres25 at acpi0: P3P3
acpipwrres26 at acpi0: P12T
acpipwrres27 at acpi0: P28W
acpipwrres28 at acpi0: P18W
acpipwrres29 at acpi0: P12W
acpipwrres30 at acpi0: P33W
acpipwrres31 at acpi0: P33X
acpipwrres32 at acpi0: P4BW
acpitz0 at acpi0: critical temperature is 90 degC
"INT33A4" at acpi0 not configured
"INT33BD" at acpi0 not configured
chvgpio0 at acpi0: GPO1 uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins
chvgpio1 at acpi0: GPO3 uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins
dwiic0 at acpi0: I2C7 addr 0xa1a26000/0x1000 irq 38
iic0 at dwiic0
chvgpio2 at acpi0: GPO0 uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins
"INT34D3" at acpi0 not configured
dwiic1 at acpi0: I2C1 addr 0xa1a32000/0x1000 irq 32
iic1 at dwiic1
chvgpio3 at acpi0: GPO2 uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins
"INT33FE" at acpi0 not configured
"PNP0501" at acpi0 not configured
sdhc0 at acpi0: SDHA addr 0xa1a3a000/0x1000 irq 45
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
sdhc1 at acpi0: SDHB addr 0xa1a38000/0x1000 irq 46
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 4-bit, sd high-speed, mmc high-speed, dma
sdhc2 at acpi0: SHC1 addr 0xa1a36000/0x1000 irq 47, gpio
sdhc2: SDHC 3.0, 200 MHz base clock
sdmmc2 at sdhc2: 4-bit, sd high-speed, mmc high-speed, dma
"INTL9C60" at acpi0 not configured
"INTL9C60" at acpi0 not configured
"8086228A" at acpi0 not configured
"BCM2E7E" at acpi0 not configured
"8086228A" at acpi0 not configured
"8086228E" at acpi0 not configured
"8086228E" at acpi0 not configured
"8086228E" at acpi0 not configured
"MAX17047" at acpi0 not configured
dwiic2 at acpi0: I2C2 addr 0xa1a30000/0x1000 irq 33
iic2 at dwiic2
"10EC5645" at acpi0 not configured
dwiic3 at acpi0: I2C3 addr 0xa1a2e000/0x1000 irq 34
iic3 at dwiic3
dwiic4 at acpi0: I2C4 addr 0xa1a2c000/0x1000 irq 35
iic4 at dwiic4
dwiic5 at acpi0: I2C5 addr 0xa1a2a000/0x1000 irq 36
iic5 at dwiic5
dwiic6 at acpi0: I2C6 addr 0xa1a28000/0x1000 irq 37
iic6 at dwiic6
"GDIX1001" at acpi0 not configured
"808622A8" at acpi0 not configured
"INT33D5" at acpi0 not configured
acpibtn0 at acpi0: LID0
"FAN02501" at acpi0 not configured
acpibtn1 at acpi0: PWRB
chvgpio4 at acpi0: GPO4 uid 5
"ACPI0011" at acpi0 not configured
"ACPI000C" at acpi0 not configured
acpiac0 at acpi0: AC unit online
"INT3400" at acpi0 not configured
"INT3407" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3409" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"USBC000" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x34
"Intel HD Graphics" rev 0x34 at pci0 dev 2 function 0 not configured
"Intel Braswell Power" rev 0x34 at pci0 dev 11 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x34: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell TXE" rev 0x34 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x34: msi
pci1 at ppb0 bus 1
vendor "Broadcom", unknown product 0x43ec (class network subclass miscellaneous, rev 0x02) at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x34
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb0 at mainbus0: 1200x1920, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sdmmc1: can't enable card
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Samsung, DJNB4R, 0000> SCSI2 0/direct removable
sd0: 119276MB, 512 bytes/sector, 244277248 sectors
uhidev0 at uhub0 port 2 configuration 1 interface 0 "SINO WEALTH Gaming Keyboard" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "SINO WEALTH Gaming Keyboard" rev 1.10/1.00 addr 2
uhidev1: iclass 3/0, 39 report ids
uhid0 at uhidev1 reportid 5: input=0, output=0, feature=5
ums0 at uhidev1 reportid 35: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid1 at uhidev1 reportid 37: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 38: input=6, output=0, feature=0
uhid3 at uhidev1 reportid 39: input=1, output=0, feature=0
ugen0 at uhub0 port 3 "Broadcom Corp BCM2045A0" rev 2.00/1.12 addr 3
uhidev2 at uhub0 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/2.09 addr 4
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub0 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/2.09 addr 4
uhidev3: iclass 3/1, 2 report ids
uhid4 at uhidev3 reportid 1: input=6, output=0, feature=0
uhid5 at uhidev3 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
Loading...