Discussion:
Upgrading to current prep
(too old to reply)
m***@posteo.net
2018-03-10 18:43:04 UTC
Permalink
Raw Message
Hi folks,
I'm upgrading to -current today, but before I did that I've been
backuping stuff and making sure I understand the current state of my
system. My system runs 6.2-release with all syspatches.

When I installed the system I used the basic installation settings and
did not modify much, for instance I let openbsd partition the drive.

The main weird thing I noticed this morning was after running df.

Filesystem Size Used Avail Capacity Mounted on
/dev/sd0a 1005M 995M -40.8M 104% /
/dev/sd0k 184G 14.6G 160G 8% /home
/dev/sd0d 3.9G 3.4M 3.7G 0% /tmp
/dev/sd0f 2.0G 1.1G 810M 58% /usr
/dev/sd0g 1005M 178M 777M 19% /usr/X11R6
/dev/sd0h 9.8G 4.8G 4.5G 52% /usr/local
/dev/sd0j 5.9G 2.0K 5.6G 0% /usr/obj
/dev/sd0i 2.0G 2.0K 1.9G 0% /usr/src
/dev/sd0e 19.0G 90.9M 18.0G 0% /var

I'm not sure what happened here, but it may be that the default space
allocation for / space is too small for desktop usage? It's more
probable that I've just messed up somehow. Worse case scenario I'm not
against rebooting into a snapshot bsd.rd and repartioning myself, I just
backed up everything of import anyways.

Dmesg just for good measure:
OpenBSD 6.2 (GENERIC.MP) #6: Wed Feb 28 21:13:02 CET 2018
***@syspatch-62-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8261529600 (7878MB)
avail mem = 8004075520 (7633MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries)
bios0: vendor LENOVO version "N14ET42W (1.20 )" date 09/13/2017
bios0: LENOVO 20BTS0Y500
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2594.51 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2594513870 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2594.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2594.00 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2594.00 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 3 (EXP1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 10 (EXP6)
acpicpu0 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0071" at acpi0 not configured
"LEN0048" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "00HW003" serial 716 type LiP oem "SMP"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2300, 2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address 54:ee:75:48:d8:82
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
ppb2 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 10
ahci0 at pci3 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 int 16, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZHPV256, BXW2> SCSI3 0/direct fixed naa.5002538900000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f799eb61a98c803a.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
iwm0: hw rev 0x210, fw ver 16.242414.0, address 60:57:18:91:b7:16
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
umass0 at uhub0 port 2 configuration 1 interface 0 "UFD USB Flash Drive" rev 2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <UFD, USB Flash Drive, 1.00> SCSI2 0/direct removable serial.05dcd757AC70A2CF4A2C
sd1: 15040MB, 512 bytes/sector, 30801920 sectors
ext2fs: wrong magic number 0x0
sd1 detached
scsibus4 detached
umass0 detached
umass0 at uhub0 port 2 configuration 1 interface 0 "UFD USB Flash Drive" rev 2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <UFD, USB Flash Drive, 1.00> SCSI2 0/direct removable serial.05dcd757AC70A2CF4A2C
sd1: 15040MB, 512 bytes/sector, 30801920 sectors
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
uid 0 on /: file system full
uid 0 on /: file system full
sd1 detached
scsibus4 detached
umass0 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
iwm0: could not add aux station (error 35)
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
uid 0 on /: file system full
uid 0 on /: file system full
Otto Moerbeek
2018-03-10 18:54:29 UTC
Permalink
Raw Message
Post by m***@posteo.net
Hi folks,
I'm upgrading to -current today, but before I did that I've been
backuping stuff and making sure I understand the current state of my
system. My system runs 6.2-release with all syspatches.
When I installed the system I used the basic installation settings and
did not modify much, for instance I let openbsd partition the drive.
The main weird thing I noticed this morning was after running df.
Filesystem Size Used Avail Capacity Mounted on
/dev/sd0a 1005M 995M -40.8M 104% /
/dev/sd0k 184G 14.6G 160G 8% /home
/dev/sd0d 3.9G 3.4M 3.7G 0% /tmp
/dev/sd0f 2.0G 1.1G 810M 58% /usr
/dev/sd0g 1005M 178M 777M 19% /usr/X11R6
/dev/sd0h 9.8G 4.8G 4.5G 52% /usr/local
/dev/sd0j 5.9G 2.0K 5.6G 0% /usr/obj
/dev/sd0i 2.0G 2.0K 1.9G 0% /usr/src
/dev/sd0e 19.0G 90.9M 18.0G 0% /var
I'm not sure what happened here, but it may be that the default space
allocation for / space is too small for desktop usage? It's more
probable that I've just messed up somehow. Worse case scenario I'm not
against rebooting into a snapshot bsd.rd and repartioning myself, I just
backed up everything of import anyways.
1005M of / is large enoug for almost all cases. It is more likely you
wrote something into /. Try finding it with cd / ; du -kx | sort -n
and then zooming into the large dir. You would not be the first
one to have written to a file in /dev instead of a device.

-Otto
Post by m***@posteo.net
OpenBSD 6.2 (GENERIC.MP) #6: Wed Feb 28 21:13:02 CET 2018
real mem = 8261529600 (7878MB)
avail mem = 8004075520 (7633MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0: vendor LENOVO version "N14ET42W (1.20 )" date 09/13/2017
bios0: LENOVO 20BTS0Y500
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2594513870 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 3 (EXP1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 10 (EXP6)
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0071" at acpi0 not configured
"LEN0048" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "00HW003" serial 716 type LiP oem "SMP"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2300, 2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address 54:ee:75:48:d8:82
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
ppb2 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 10
ahci0 at pci3 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 int 16, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZHPV256, BXW2> SCSI3 0/direct fixed naa.5002538900000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f799eb61a98c803a.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
iwm0: hw rev 0x210, fw ver 16.242414.0, address 60:57:18:91:b7:16
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
umass0 at uhub0 port 2 configuration 1 interface 0 "UFD USB Flash Drive" rev 2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <UFD, USB Flash Drive, 1.00> SCSI2 0/direct removable serial.05dcd757AC70A2CF4A2C
sd1: 15040MB, 512 bytes/sector, 30801920 sectors
ext2fs: wrong magic number 0x0
sd1 detached
scsibus4 detached
umass0 detached
umass0 at uhub0 port 2 configuration 1 interface 0 "UFD USB Flash Drive" rev 2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <UFD, USB Flash Drive, 1.00> SCSI2 0/direct removable serial.05dcd757AC70A2CF4A2C
sd1: 15040MB, 512 bytes/sector, 30801920 sectors
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
uid 0 on /: file system full
uid 0 on /: file system full
sd1 detached
scsibus4 detached
umass0 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
iwm0: could not add aux station (error 35)
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 3
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev1 reportid 22: input=2, output=0, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid70008:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
uid 0 on /: file system full
uid 0 on /: file system full
Patrick Marchand
2018-03-10 19:27:50 UTC
Permalink
Raw Message
Post by Otto Moerbeek
You would not be the first
one to have written to a file in /dev instead of a device.
Thats exactly what happened, my /dev/sd1 is 943056 bytes large....
I was trying to dd dragonflybsd to a usb stick earlier this week and messed up.
What exactly do I have to do to fix this?
just rm the file. /dev/sd1 is not a device name anyway,
-Otto
cool, thanks!
Otto Moerbeek
2018-03-11 07:27:26 UTC
Permalink
Raw Message
Obsd default partitioning and default packaging still fails me.
/usr/src and /usr/obj contain variable content, and thus should be
/var/src and /var/obj instead, allowing for /usr to be mounted read
only as originally intended for unix systems. Further, variable
content partitions such as /var and /home should be large enough to
allow for ssd wear levelling, or you will toss away expensive ssds
like autumn leaves. Finally, all games should be moved from the
default packages to ports. These changes are done systematically here,
and it is swearing and smothering each time we do it. > > Sent from
ProtonMail Mobile > > > ,> ,> ,>
Get a decent mailer that wraps lines.

The default setup and autoallocation fits development use, for that
/usr shoud be modifiable.

If the default sizes do not fit you, you can modify them interactively
after auto allocation using the R command or by using an alternate
auto allocation table.

As for wear levelling, it is enough to not just allocate part of the
ssd. It does not not matter if that part is in an fs or not.
Actually, it might be better to make the free space not part of an fs.

As for the games, they have always been part of OpenBSD.

-Otto
Otto Moerbeek
2018-03-11 10:27:19 UTC
Permalink
Raw Message
Post by Otto Moerbeek
Post by Otto Moerbeek
The default setup and autoallocation fits development use, for that
/usr shoud be modifiable.
It can be remounted rw in that case. No need to keep it rw by default with src and obj inside. The unix standard ro is more secure.
Post by Otto Moerbeek
If the default sizes do not fit you, you can modify them interactively
after auto allocation using the R command or by using an alternate
auto allocation table.
I do not want the installer to fall back to the shell. I need a custom A option.
The installer *asks* if you weant to modify the auto-allocated one. NO
need to fall back to shell. Also using an alternate table is possible.
If you do not want to learn about the tools available, that's your
problem.

-Otto
Otto Moerbeek
2018-03-11 10:58:33 UTC
Permalink
Raw Message
Post by Otto Moerbeek
Post by Otto Moerbeek
Post by Otto Moerbeek
The default setup and autoallocation fits development use, for that
/usr shoud be modifiable.
It can be remounted rw in that case. No need to keep it rw by default with src and obj inside. The unix standard ro is more secure.
Post by Otto Moerbeek
If the default sizes do not fit you, you can modify them interactively
after auto allocation using the R command or by using an alternate
auto allocation table.
I do not want the installer to fall back to the shell. I need a custom A option.
The installer *asks* if you weant to modify the auto-allocated one. NO
need to fall back to shell. Also using an alternate table is possible.
If you do not want to learn about the tools available, that's your
problem.
-Otto
I'll explain it differently.

As developers we have the (earned) privilege to come up with the
default behaviour of the installer. That's a compromise already, but
geared towards a development system. We realize the defaults are not
suitable for everyone. So we've added mechanisms to adapt the default
behaviour of the installer.

But if you come here to bitch about default behaviour and you show you
didn't study the mechanisms to change it, what can we do?

-Otto
SJP Lists
2018-03-12 11:34:44 UTC
Permalink
Raw Message
only as originally intended for unix systems. Further, variable
content partitions such as /var and /home should be large enough to
allow for ssd wear levelling, or you will toss away expensive ssds
like autumn leaves. Finally, all games should be moved from the
I keep hearing about longevity issues with flash based storage. It seems
this paranoia just won't die.

I'm coming up to 13 years of installing OpenBSD onto flash based storage
and I've not had a failure yet. Only ever used softdep and noatime.
Installed into Sun Ultra's with IDE-CD adaptors, Soekris 5501 and 6501,
ALIX 2's and 3's and now also running off thumb drives in these sweet
little EdgeRouter LITE's. Always stuck to SanDisk and Lexar.

https://marc.info/?l=openbsd-misc&m=113148165022620&w=2

I had one 2.5" Corsair SSD fail outside of OpenBSD usage, but it was a
sudden death and well within the infant mortality stage of the bathtub
curve.

And on a note related to SSD longevity, I've run Samsung SSD's in my
Sony PS4 and PS4 Pro since both were released and they both constantly
write video capture data to "disk" while on and this is a feature I
cannot switch off. They're both still working fine too. My PS4 would
have hammered that SSD for hours most days for about 4 years.


Shane
Otto Moerbeek
2018-03-12 12:38:19 UTC
Permalink
Raw Message
Post by SJP Lists
only as originally intended for unix systems. Further, variable
content partitions such as /var and /home should be large enough to
allow for ssd wear levelling, or you will toss away expensive ssds
like autumn leaves. Finally, all games should be moved from the
I keep hearing about longevity issues with flash based storage. It seems
this paranoia just won't die.
I'm coming up to 13 years of installing OpenBSD onto flash based storage
and I've not had a failure yet. Only ever used softdep and noatime.
Installed into Sun Ultra's with IDE-CD adaptors, Soekris 5501 and 6501,
ALIX 2's and 3's and now also running off thumb drives in these sweet
little EdgeRouter LITE's. Always stuck to SanDisk and Lexar.
https://marc.info/?l=openbsd-misc&m=113148165022620&w=2
I had one 2.5" Corsair SSD fail outside of OpenBSD usage, but it was a
sudden death and well within the infant mortality stage of the bathtub
curve.
And on a note related to SSD longevity, I've run Samsung SSD's in my
Sony PS4 and PS4 Pro since both were released and they both constantly
write video capture data to "disk" while on and this is a feature I
cannot switch off. They're both still working fine too. My PS4 would
have hammered that SSD for hours most days for about 4 years.
Shane
I have more or less the same experience. I always allocate some unused
partition on my ssd's, about 10%. But I do not have any data if that
is having anything to do with the good experience I have with ssd's.

-Otto
Kevin Chadwick
2018-03-12 13:17:40 UTC
Permalink
Raw Message
On Mon, 12 Mar 2018 22:34:44 +1100
Post by SJP Lists
I keep hearing about longevity issues with flash based storage. It
seems this paranoia just won't die.
It is not paranoia but dependent on use cases! The OPs concerns have a
high chance to be unfounded however.
Post by SJP Lists
I'm coming up to 13 years of installing OpenBSD onto flash based
storage and I've not had a failure yet.
That isn't surprising. If you take the lowest power flash with the
worst guarantee of 10,000 writes as oppose to the 100,000 write flash
then even with KARL that would allow 27 years of daily boots, right.
Scratch/swap space is rarely used with the memory available in modern
systems too. That is also assuming the same sectors are written each
time.

Also, cheap onboard or flash sticks are very different to SSD with built
in write management and space reservation.

High write use cases could be an issue however, perhaps sql databases
and partition table updates are an issue?

Additionally I have had adoptable sd on Android have a weird failure
where I couldn't wipe or write anything new but could always read
the data back atleast after a replug so it is possible that you may not
always detect failures. I don't use adoptable SD on Android any more
despite wanting to. I assume but I am not sure how SDs differ to onboard
phone memory though or the management differs for the experimental
feature or perhaps it was just an odd hw failure where sw thought the
writes had occurred but they had not physically?

Mihai Popescu
2018-03-11 11:00:06 UTC
Permalink
Raw Message
... should be ...
Why are some people considering OpenBSD should suit them and only them?
They are not even part from development project, they are not even
close to the concept and still proclaiming on the mail list what
"should be". I always wonder where this feeling of better knowledge
comes from.
Loading...