Discussion:
Audio stuttering on media playback with sndiod
(too old to reply)
Daniel Bolgheroni
2018-04-04 06:22:04 UTC
Permalink
Raw Message
Hi,

audio is stuttering on media playback when run through sndiod. It's OK
without it.

Here is an example of audio/cmus attaching to play a mp3 file:

x250$ doas sndiod -ddd
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/aucat/aucat0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from <cmus>, mode = 1, ver 7
sock,rmsg,widl: using snd0 pst=cfg.default, mode = 1
cmus0: overwritten slot 0
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, mode = 0, fd = 6
sio(rsnd/0|ini): created
snd0 pst=ini: 48000Hz, s16le, play 0:1, rec 0:1, 8 blocks of 960 frames
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: SETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: playback channels 0:1 -> 0:1
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 44100Hz sample rate, 882 frame blocks
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 13230 frame buffer
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: START message
cmus0 vol=127,pst=ini,mmc=off: playing s16le -> s16le
cmus0 vol=127,pst=ini,mmc=off: allocated 13230/20286 fr buffers
cmus0 vol=127,pst=sta,mmc=off: 44100Hz, s16le, play 0:1, 15 blocks of 882 frames
cmus0 vol=127,pst=sta,mmc=off,rmsg,widl: building SETVOL message, vol = 127
snd0 pst=ini: device started
snd0 pst=run: started
cmus0 vol=127,pst=run,mmc=off: attached at -7056, delta = 0
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
resamp: 882/960
cmus0 vol=127,pst=run,mmc=off: set weight: 23170/23170
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
snd0 pst=run: rec hw xrun, rused = 2880/7680
snd0 pst=run: play hw xrun, pused = 4800/7680
snd0 pst=run: rec hw xrun, rused = 1920/7680
snd0 pst=run: play hw xrun, pused = 5760/7680
snd0 pst=run: rec hw xrun, rused = 960/7680
snd0 pst=run: play hw xrun, pused = 6720/7680
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
snd0 pst=run: rec hw xrun, rused = 2880/7680
snd0 pst=run: play hw xrun, pused = 4800/7680
snd0 pst=run: rec hw xrun, rused = 1920/7680
snd0 pst=run: play hw xrun, pused = 5760/7680
snd0 pst=run: rec hw xrun, rused = 960/7680
snd0 pst=run: play hw xrun, pused = 6720/7680
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680

(... flood)

The same on a X220 gives me this (it's OK here):

x220$ doas sndiod -ddd
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/aucat/aucat0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from <cmus>, mode = 1, ver 7
sock,rmsg,widl: using snd0 pst=cfg.default, mode = 1
cmus0: overwritten slot 0
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, mode = 0, fd = 6
sio(rsnd/0|ini): created
snd0 pst=ini: 48000Hz, s16le, play 0:1, rec 0:1, 8 blocks of 960 frames
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: SETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: playback channels 0:1 -> 0:1
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 44100Hz sample rate, 882 frame blocks
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 13230 frame buffer
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: START message
cmus0 vol=127,pst=ini,mmc=off: playing s16le -> s16le
cmus0 vol=127,pst=ini,mmc=off: allocated 13230/20286 fr buffers
cmus0 vol=127,pst=sta,mmc=off: 44100Hz, s16le, play 0:1, 15 blocks of 882 frames
cmus0 vol=127,pst=sta,mmc=off,rmsg,widl: building SETVOL message, vol = 127
snd0 pst=ini: device started
snd0 pst=run: started
cmus0 vol=127,pst=run,mmc=off: attached at -7056, delta = 0
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
resamp: 882/960
cmus0 vol=127,pst=run,mmc=off: set weight: 23170/23170

I couldn't spot any difference in the initialization, but on the run,
the former case is flooded with this pair of messages:

snd0: rec hw xrun, rused = 2880/7680
snd0: play hw xrun, pused = 4800/7680

From source:

#define XRUN_ERROR 2 /* xruns are errors, eof/hup buffer */

OK, but I can't figure it out why this is happening on one box and not on the
other. dmesg's for both boxes below.

Thank you.


X250 dmesg:
OpenBSD 6.3-current (GENERIC.MP) #127: Tue Apr 3 14:16:30 MDT 2018
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8469942272 (8077MB)
avail mem = 8206159872 (7826MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (64 entries)
bios0: vendor LENOVO version "N10ET50W (1.29 )" date 02/26/2018
bios0: LENOVO 20CL006VBR
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI BGRT DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.57 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
acpihpet0: recalibrated TSC frequency 2593999740 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.22 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.22 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.22 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpicpu0 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C3(***@233 ***@0x40), C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpicmos0 at acpi0
"LEN0071" at acpi0 not configured
"LEN0046" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1773" serial 1004 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 model "45N1775" serial 632 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2601, 2600, 2500, 2300, 2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, mac_type 0x1d phy_type 0xb, address 68:f7:28:f9:ce:6a
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TD256, DXT0> SCSI3 0/direct fixed naa.5002538500000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 244197MB, 512 bytes/sector, 500116577 sectors
root on sd1a (946ec19c4a454ae0.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x210, fw ver 16.242414.0, address dc:53:60:0c:83:2a


X220 dmesg:
OpenBSD 6.3-current (GENERIC.MP) #127: Tue Apr 3 14:16:30 MDT 2018
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6303641600 (6011MB)
avail mem = 6105513984 (5822MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016
bios0: LENOVO 4291MV7
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2492.25 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
acpihpet0: recalibrated TSC frequency 2491907293 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.90 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.90 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.90 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP7)
acpicpu0 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
acpicpu1 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
acpicpu2 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
acpicpu3 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpicmos0 at acpi0
"LEN0020" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1023" serial 16065 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"IBM0079" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK docked (15)
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, mac_type 0x1c phy_type 0xa, address f0:de:f1:7c:7b:f5
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi, MIMO 1T2R, BGS, address 74:e5:0b:19:5c:82
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WDS120G1G0A-, Z331> SCSI3 0/direct fixed naa.5001b444a69bf89b
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub2 port 1 configuration 1 interface 0 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr 3
uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
urtwn0 at uhub4 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev 2.00/0.00 addr 3
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address 50:3e:aa:30:f4:83
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 114470MB, 512 bytes/sector, 234435953 sectors
root on sd1a (69820133ee5efcb1.a) swap on sd1b dump on sd1b
--
db
Robert Klein
2018-04-10 13:20:33 UTC
Permalink
Raw Message
Hi Daniel,

On Wed, 4 Apr 2018 03:22:04 -0300
Post by Daniel Bolgheroni
Hi,
audio is stuttering on media playback when run through sndiod. It's OK
without it.
Maybe related. Yesterday I disabled webcam and microphone in BIOS on
my X250. Then Video playback (audio and video) was stuttering. I
didn't investigate further, as: reverting BIOS settings made it Ok
again.


Best regards
Robert
Post by Daniel Bolgheroni
x250$ doas sndiod -ddd
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/aucat/aucat0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from <cmus>, mode = 1, ver 7
sock,rmsg,widl: using snd0 pst=cfg.default, mode = 1
cmus0: overwritten slot 0
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, mode = 0, fd = 6
sio(rsnd/0|ini): created
snd0 pst=ini: 48000Hz, s16le, play 0:1, rec 0:1, 8 blocks of 960
frames cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: SETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: playback channels 0:1 -> 0:1
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 44100Hz sample rate, 882
frame blocks cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 13230 frame
buffer cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: START message
cmus0 vol=127,pst=ini,mmc=off: playing s16le -> s16le
cmus0 vol=127,pst=ini,mmc=off: allocated 13230/20286 fr buffers
cmus0 vol=127,pst=sta,mmc=off: 44100Hz, s16le, play 0:1, 15 blocks of
882 frames cmus0 vol=127,pst=sta,mmc=off,rmsg,widl: building SETVOL
message, vol = 127 snd0 pst=ini: device started
snd0 pst=run: started
cmus0 vol=127,pst=run,mmc=off: attached at -7056, delta = 0
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
resamp: 882/960
cmus0 vol=127,pst=run,mmc=off: set weight: 23170/23170
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
snd0 pst=run: rec hw xrun, rused = 2880/7680
snd0 pst=run: play hw xrun, pused = 4800/7680
snd0 pst=run: rec hw xrun, rused = 1920/7680
snd0 pst=run: play hw xrun, pused = 5760/7680
snd0 pst=run: rec hw xrun, rused = 960/7680
snd0 pst=run: play hw xrun, pused = 6720/7680
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
snd0 pst=run: rec hw xrun, rused = 2880/7680
snd0 pst=run: play hw xrun, pused = 4800/7680
snd0 pst=run: rec hw xrun, rused = 1920/7680
snd0 pst=run: play hw xrun, pused = 5760/7680
snd0 pst=run: rec hw xrun, rused = 960/7680
snd0 pst=run: play hw xrun, pused = 6720/7680
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
(... flood)
x220$ doas sndiod -ddd
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/aucat/aucat0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from <cmus>, mode = 1, ver 7
sock,rmsg,widl: using snd0 pst=cfg.default, mode = 1
cmus0: overwritten slot 0
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, mode = 0, fd = 6
sio(rsnd/0|ini): created
snd0 pst=ini: 48000Hz, s16le, play 0:1, rec 0:1, 8 blocks of 960
frames cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: SETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: playback channels 0:1 -> 0:1
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 44100Hz sample rate, 882
frame blocks cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 13230 frame
buffer cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: START message
cmus0 vol=127,pst=ini,mmc=off: playing s16le -> s16le
cmus0 vol=127,pst=ini,mmc=off: allocated 13230/20286 fr buffers
cmus0 vol=127,pst=sta,mmc=off: 44100Hz, s16le, play 0:1, 15 blocks of
882 frames cmus0 vol=127,pst=sta,mmc=off,rmsg,widl: building SETVOL
message, vol = 127 snd0 pst=ini: device started
snd0 pst=run: started
cmus0 vol=127,pst=run,mmc=off: attached at -7056, delta = 0
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
resamp: 882/960
cmus0 vol=127,pst=run,mmc=off: set weight: 23170/23170
I couldn't spot any difference in the initialization, but on the run,
snd0: rec hw xrun, rused = 2880/7680
snd0: play hw xrun, pused = 4800/7680
#define XRUN_ERROR 2 /* xruns are errors, eof/hup buffer */
OK, but I can't figure it out why this is happening on one box and
not on the other. dmesg's for both boxes below.
Thank you.
OpenBSD 6.3-current (GENERIC.MP) #127: Tue Apr 3 14:16:30 MDT 2018
real mem = 8469942272 (8077MB)
avail mem = 8206159872 (7826MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0: vendor LENOVO version "N10ET50W (1.29 )" date 02/26/2018
bios0: LENOVO 20CL006VBR
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT
SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI BGRT
DMAR acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4)
XHCI(S3) EHC1(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0
at acpi0: 14318179 Hz acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache acpihpet0: recalibrated TSC
frequency 2593999740 Hz cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 acpipwrres1 at
acpi0: NVP3, resource for PEG_ acpipwrres2 at acpi0: NVP2, resource
for PEG_ acpitz0 at acpi0: critical temperature is 128 degC acpibtn0
at acpi0: LID_ acpibtn1 at acpi0: SLPB
acpicmos0 at acpi0
"LEN0071" at acpi0 not configured
"LEN0046" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1773" serial 1004 type LION oem
"SANYO" acpibat1 at acpi0: BAT1 model "45N1775" serial 632 type
LION oem "SANYO" acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2601, 2600, 2500, 2300,
2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500
MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core
5G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD
Graphics 5500" rev 0x09 drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
msi usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1 "Intel 9 Series MEI" rev 0x03 at pci0 dev 22
function 0 not configured em0 at pci0 dev 25 function 0 "Intel
I218-LM" rev 0x03: msi, mac_type 0x1d phy_type 0xb, address
68:f7:28:f9:ce:6a azalia1 at pci0 dev 27 function 0 "Intel 9 Series
HD Audio" rev 0x03: msi azalia1: codecs: Realtek ALC292 audio0 at
azalia1 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev
0xe3: msi pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev
0x01: msi sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev
0x59, msi ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev
0x03: apic 2 int 23 usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC"
rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev
0x03: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TD256, DXT0> SCSI3
0/direct fixed naa.5002538500000000 sd0: 244198MB, 512 bytes/sector,
500118192 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 9
Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate
Matching Hub" rev 2.00/0.03 addr 2 vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2
0/direct fixed sd1: 244197MB, 512 bytes/sector, 500116577 sectors
root on sd1a (946ec19c4a454ae0.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x210, fw ver 16.242414.0, address dc:53:60:0c:83:2a
OpenBSD 6.3-current (GENERIC.MP) #127: Tue Apr 3 14:16:30 MDT 2018
real mem = 6303641600 (6011MB)
avail mem = 6105513984 (5822MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016
bios0: LENOVO 4291MV7
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
TCPA SSDT SSDT DMAR UEFI UEFI UEFI acpi0: wakeup devices LID_(S3)
SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179
Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache acpihpet0: recalibrated TSC
frequency 2491907293 Hz cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP7)
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpicmos0 at acpi0
"LEN0020" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1023" serial 16065 type LION oem
"SANYO" acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"IBM0079" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK docked (15)
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000,
1800, 1600, 1400, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, mac_type
0x1c phy_type 0xa, address f0:de:f1:7c:7b:f5 ehci0 at pci0 dev 26
function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 usb0 at
ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0
"Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27
Conexant CX20590, Intel/0x2805, using Conexant CX20590 audio0 at
azalia0 ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev
0xb4: msi pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi,
MIMO 1T2R, BGS, address 74:e5:0b:19:5c:82 ppb2 at pci0 dev 28
function 3 "Intel 6 Series PCIE" rev 0xb4: msi pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2
int 16 sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2
int 23 usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev
msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WDS120G1G0A-, Z331> SCSI3
0/direct fixed naa.5001b444a69bf89b sd0: 114473MB, 512 bytes/sector,
234441648 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 6
Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate
Matching Hub" rev 2.00/0.00 addr 2 uhub3 at uhub2 port 1
configuration 1 interface 0 "Standard Microsystems product 0x2514"
rev 2.00/0.00 addr 3 uhub4 at uhub1 port 1 configuration 1 interface
0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 urtwn0 at uhub4 port
1 configuration 1 interface 0 "Realtek 802.11n NIC" rev 2.00/0.00
addr 3 urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address
50:3e:aa:30:f4:83 vscsi0 at root scsibus2 at vscsi0: 256 targets
softraid0 at root scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2
0/direct fixed sd1: 114470MB, 512 bytes/sector, 234435953 sectors
root on sd1a (69820133ee5efcb1.a) swap on sd1b dump on sd1b
Alexandre Ratchov
2018-04-14 09:55:23 UTC
Permalink
Raw Message
Post by Robert Klein
Hi Daniel,
On Wed, 4 Apr 2018 03:22:04 -0300
Post by Daniel Bolgheroni
Hi,
audio is stuttering on media playback when run through sndiod. It's OK
without it.
Maybe related. Yesterday I disabled webcam and microphone in BIOS on
my X250. Then Video playback (audio and video) was stuttering. I
didn't investigate further, as: reverting BIOS settings made it Ok
again.
Thanks. Few notes for the mailing-list archives:

Certains laptops have a "disable microphone" knob in the BIOS which
makes the device operate play-only, but it still reports full-duplex
capability. This confuses any full-duplex program, including sndiod,
and makes sound stutter. I've found no way to detect this situation.

Until we manage to properly detect it in the azalia driver, I'd
suggest not using the BIOS knob (ie keep your microphone enabled). To
disable it, run as root:

chmod 600 /dev/audio[0-9]

and restart audio programs (or reboot if unsure). This is reliable
because sndiod has no root privileges; even if it is compromised, the
attacker won't be able to record. And this works for everyone, even
for those without the BIOS "feature" :-)

HTH
Alexandre Ratchov
2018-04-24 20:09:51 UTC
Permalink
Raw Message
Post by Alexandre Ratchov
Post by Robert Klein
Hi Daniel,
On Wed, 4 Apr 2018 03:22:04 -0300
Post by Daniel Bolgheroni
Hi,
audio is stuttering on media playback when run through sndiod. It's OK
without it.
Maybe related. Yesterday I disabled webcam and microphone in BIOS on
my X250. Then Video playback (audio and video) was stuttering. I
didn't investigate further, as: reverting BIOS settings made it Ok
again.
Certains laptops have a "disable microphone" knob in the BIOS which
makes the device operate play-only, but it still reports full-duplex
capability. This confuses any full-duplex program, including sndiod,
and makes sound stutter. I've found no way to detect this situation.
Until we manage to properly detect it in the azalia driver, I'd
suggest not using the BIOS knob (ie keep your microphone enabled). To
chmod 600 /dev/audio[0-9]
As noted by florian@, the proper mode is 0622 (write-only, i.e.
play-only). thanks.

Loading...