pci cardbus adapter "not configured" - ENE 1410

[f***@libertysurf.fr]

Hello.



I plugged an Elan P111 cardbus adapter (PCI to PCMCIA adapter card) in my Soekris net4801, and can't have the card working.

( http://www.elandigitalsystems.com/adapter/p111.php )



My soekris boots on a read-only flashcard on which OpenBSD 3.7 has been pushed using flashdist.



I joigned below the dmesg.



I've been searching in the newsgroups for about a week and did not find anything about my problem.



I tried to disable pcibios (boot -c, config -ef), this did not help (which is not surprising considering my

box does'nt seem to have the driver installed).



What is surprising me is that I'm sure I have seen on internet some dmesg displays telling that a

"ENE CB-1410 CardBus" device was properly installed on the machine.



The ELAN P111 is supported on different linux distributions:

http://www.elandigitalsystems.com/support/pfaq/plinux.php

, what gives me some hope about the possibility to have it working properly.





Now my two questions:



1- The ENE 1410 is a universal cardbus controller (the doc says "Intel 82365 compatible register set").

I guess you support it but do I guess well ? If not which replacement cardbus adapter PCI card

do you recommend?



2- Did anybody struggle about this issue and could help me?





Thanks to you all and best regards.



F. Billes.



==========================================================================

dmesg

==========================================================================

OpenBSD 3.7 (NET4801) #0: Sat Apr 9 06:02:39 CEST 2005

***@openbsd.domain.com:/usr/src/sys/arch/i386/compile/NET4801

cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz

cpu0: FPU,TSC,MSR,CX8,CMOV,MMX

cpu0: TSC disabled

real mem = 133799936 (130664K)

avail mem = 119463936 (116664K)

using 1658 buffers containing 6791168 bytes (6632K) of memory

mainbus0 (root)

bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840

pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000

pcibios0: pcibios_get_intr_routing - function not supported

pcibios0: PCI IRQ Routing information unavailable.

pcibios0: PCI bus #1 is the last bus

bios0: ROM list: 0xc8000/0x9000

cpu0 at mainbus0

pci0 at mainbus0 bus 0: configuration mode 1 (no bios)

pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00

sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c4:f3:6c

nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1

sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c4:f3:6d

nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1

sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, address 00:00:24:c4:f3:6e

nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1

=====================================================================

<problem>

=====================================================================

"ENE CB-1410 CardBus" rev 0x01 at pci0 dev 10 function 0 not configured

=====================================================================

</problem>

=====================================================================

pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00

"NS SC1100 SMI/ACPI" rev 0x00 at pci0 dev 18 function 1 not configured

pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility

wd0 at pciide0 channel 0 drive 0: <CF-ATA>

wd0: 1-sector PIO, LBA, 244MB, 500736 sectors

wd0(pciide0:0:0): using PIO mode 2



-------------- ALICE HAUT DEBIT : TRIPLE PLAY A 29,95 EUR/MOIS --------------
Dicouvrez vite ALICEBOX : avec le modem WIFI, profitez de l'ADSL, de la TELEPHONIE et en exclusiviti de la TELEVISION !
Binificiez aussi de la hotline gratuite 24h/24 ! Soumis ` conditions. Pour en profiter cliquez ici http://abonnement.aliceadsl.fr

[Stuart Henderson]

Post by f***@libertysurf.fr
My soekris boots on a read-only flashcard on which OpenBSD 3.7 has
been pushed using flashdist.

You're using a custom kernel which probably (given that it says
'net4801') doesn't support cardbus. Try GENERIC.