6.9 + 001: uvm

Discussion:

6.9 + 001: uvm_fault

Harald Dunkel

2021-05-16 09:36:32 UTC

Permalink

PPS: I got a similar panic on another host after installing syspatch
001, see attachment.

Regards
Harri

Harald Dunkel

2021-05-16 10:10:33 UTC

Permalink

And another attempt, see attachment.

Seems I have to power cycle to make it boot.

Regards
Harri

Jonathan Gray

2021-05-16 10:35:24 UTC

Permalink

Post by Harald Dunkel
And another attempt, see attachment.
Seems I have to power cycle to make it boot.

There have been a few reports of this in the last few weeks.
An initial workaround patch is in
https://marc.info/?l=openbsd-bugs&m=162012367130138&w=2

If you can plug in a display does this still occur afterwards?

Post by Harald Dunkel
Regards
Harri
OpenBSD/amd64 (redgatea.red.aixigo.de) (tty00)
login: root
Last login: Sun May 16 11:45:27 on ttyp0 from 2a00:fe0:30:60::7a
OpenBSD 6.8 (GENERIC.MP) #5: Mon Feb 22 04:36:10 MST 2021
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have mail.
redgatea# sysupgrade
Fetching from https://cdn.openbsd.org/pub/OpenBSD/6.9/amd64/
SHA256.sig 100% |*************************************| 2144 00:00
Signature Verified
INSTALL.amd64 100% |************************************| 43523 00:00
base69.tgz 100% |*************************************| 291 MB 00:16
bsd 100% |*************************************| 20423 KB 00:02
bsd.mp 100% |*************************************| 20515 KB 00:02
bsd.rd 100% |*************************************| 4107 KB 00:01
comp69.tgz 100% |*************************************| 85958 KB 00:06
game69.tgz 100% |*************************************| 2741 KB 00:00
man69.tgz 100% |*************************************| 7560 KB 00:01
xbase69.tgz 100% |*************************************| 29789 KB 00:03
xfont69.tgz 100% |*************************************| 39342 KB 00:04
xserv69.tgz 100% |*************************************| 18351 KB 00:02
xshare69.tgz 100% |*************************************| 4502 KB 00:01
Verifying sets.
Fetching updated firmware.
Upgrading.
stopping package daemons: dnsmasq zabbix_agentd.
syncing disks... done
carp: carp0 demoted group carp by 1 to 1 (carpdev)
carp: carp0 demoted group external by 1 to 1 (carpdev)
carp: carp0 demoted group externalcarp by 1 to 1 (carpdev)
carp: carp0 demoted group egress by 1 to 1 (carpdev)
carp: carp1 demoted group carp by 1 to 2 (carpdev)
carp: carp1 demoted group internal by 1 to 1 (carpdev)
carp: carp2 demoted group carp by 1 to 3 (carpdev)
carp: carp2 demoted group yellow by 1 to 1 (carpdev)
rebooting...
919 3939
19 99 19³¹) 391919 219993 39
93 2192921 2199 19219
21939931
919 91921¹þÞWÞ×Þ1BBBÂB"BBBÂBBBRBÂ>> OpenBSD/amd64 BOOT 3.52
boot>
booting hd0a:/bsd.upgrade: 3818189+1590272+3878376+0+704512 [109+288+28]=0x989530
entry point at 0xffffffff81001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.9 (RAMDISK_CD) #456: Mon Apr 19 10:47:37 MDT 2021
real mem = 8478871552 (8086MB)
avail mem = 8217878528 (7837MB)
random: good seed from bootblocks
mainbus0 at root
bios0: vendor American Megatrends Inc. version "5.11" date 04/08/2016
bios0: Default string Default string
acpi0 at bios0: ACPI 5.0
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicmos0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
"INTCF1C" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
cpu0: using Silvermont MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
wsdisplay1 at vga1 mux 1
wsdisplay1: screen 0 added (80x25, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: port 1: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, Hitachi HTS54252, BBDO> naa.5000cca532c0fb69
sd0: 190782MB, 512 bytes/sector, 390721968 sectors
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:8f
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:90
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:91
ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05
pci5 at ppb4 bus 5
ppb5 at pci5 dev 1 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci6 at ppb5 bus 6
em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:92
ppb6 at pci5 dev 2 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci7 at ppb6 bus 7
em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:93
ppb7 at pci5 dev 3 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci8 at ppb7 bus 8
em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:94
"Intel Braswell PCU LPC" rev 0x35 at pci0 dev 31 function 0 not configured
"Intel Braswell SMBus" rev 0x35 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.9 installation program.
Performing non-interactive upgrade...
Terminal type? [vt220] vt220
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0] sd0
Checking root filesystem (fsck -fp /dev/sd0a)... OK.
Mounting root filesystem (mount -o ro /dev/sd0a /mnt)... OK.
Force checking of clean non-root filesystems? [no] no
fsck -p 1b53344a3fd48897.e... OK.
/dev/sd0a (1b53344a3fd48897.a) on /mnt type ffs (rw, local, wxallowed)
/dev/sd0e (1b53344a3fd48897.e) on /mnt/export type ffs (rw, local, nodev, nosuid)
Let's upgrade the sets!
Location of sets? (disk http nfs or 'done') [http] disk
Is the disk partition already mounted? [yes] yes
Pathname to the sets? (or 'done') [6.9/amd64] /home/_sysupgrade/
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
[X] bsd [X] base69.tgz [X] game69.tgz [X] xfont69.tgz
[X] bsd.mp [X] comp69.tgz [X] xbase69.tgz [X] xserv69.tgz
[X] bsd.rd [X] man69.tgz [X] xshare69.tgz
Set name(s)? (or 'abort' or 'done') [done] done
Directory does not contain SHA256.sig. Continue without verification? [no] yes
Installing bsd 100% |**************************| 20423 KB 00:01
Installing bsd.mp 100% |**************************| 20515 KB 00:01
Installing bsd.rd 100% |**************************| 4107 KB 00:00
Installing base69.tgz 100% |**************************| 291 MB 01:01
Installing comp69.tgz 100% |**************************| 85958 KB 00:39
Installing man69.tgz 100% |**************************| 7560 KB 00:13
Installing game69.tgz 100% |**************************| 2741 KB 00:00
Installing xbase69.tgz 100% |**************************| 29789 KB 00:10
Installing xshare69.tgz 100% |**************************| 4502 KB 00:16
Installing xfont69.tgz 100% |**************************| 39342 KB 00:20
Installing xserv69.tgz 100% |**************************| 18351 KB 00:03
Location of sets? (disk http nfs or 'done') [done] done
Making all device nodes... done.
Multiprocessor machine; using bsd.mp instead of bsd.
Relinking to create unique kernel... done.
CONGRATULATIONS! Your Osyncing disks... done
rebooting...
q21939
4393919 199 91Ù6³6Z299
31239339
9
219i5BBÂB"BBBBÂBB"BBBÂ>> OpenBSD/amd64 BOOT 3.53
boot>
booting hd0a:/bsd: 14406952+3220496+344096+0+1175552 [1016190+128+1145856+866050]=0x1528908
entry point at 0xffffffff81001000
[ using 3029256 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.9 (GENERIC.MP) #473: Mon Apr 19 10:40:28 MDT 2021
real mem = 8478871552 (8086MB)
avail mem = 8206524416 (7826MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0: vendor American Megatrends Inc. version "5.11" date 04/08/2016
bios0: Default string Default string
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
acpi0: wakeup devices BRC1(S0) XHC1(S4) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicmos0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
"INTCF1C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C0B" at acpi0 not configured
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: CLK0, resource for CAMD
acpipwrres2 at acpi0: CLK0, resource for CAM1
acpipwrres3 at acpi0: CLK1, resource for CAM2, CAM3
acpipwrres4 at acpi0: USBC, resource for XHC1
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 95 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1680 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
drm0 at inteldrm0
inteldrm0: msi, CHERRYVIEW, gen 8
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, Hitachi HTS54252, BBDO> naa.5000cca532c0fb69
sd0: 190782MB, 512 bytes/sector, 390721968 sectors
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:8f
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:90
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:91
ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05
pci5 at ppb4 bus 5
ppb5 at pci5 dev 1 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci6 at ppb5 bus 6
em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:92
ppb6 at pci5 dev 2 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci7 at ppb6 bus 7
em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:93
ppb7 at pci5 dev 3 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci8 at ppb7 bus 8
em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:94
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay at vga0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1b53344a3fd48897.a) swap on sd0b dump on sd0b
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
fd0 at fdc0 drive 0: density unknown
Automatic boot in progress: starting file system checks.
/dev/sd0a (1b53344a3fd48897.a): file system is clean; not checking
/dev/sd0e (1b53344a3fd48897.e): file system is clean; not checking
fd1 at fdc0 drive 1: density unknown
pf enabled
net.inet.ip.forwarding: 0 -> 1
net.inet6.ip6.forwarding: 0 -> 1
net.inet.carp.preempt: 0 -> 1
net.inet.carp.log: 2 -> 6
ddb.panic: 1 -> 1
ddb.console: 0 -> 1
starting network
add net 2a00:fe0:30:ffe0::/64: gateway 2001:67c:13b0:ffff::60
add net 5.145.142.144/29: gateway 5.145.142.28: Network is unreachable
carp: pfsync0 demoted group carp by 32 to 160 (pfsync init)
carp: pfsync0 demoted group pfsync by 32 to 32 (pfsync init)
carp: pfsync0 demoted group carp by 1 to 161 (pfsync bulk start)
carp: pfsync0 demoted group pfsync by 1 to 33 (pfsync bulk start)
carp: carp0 demoted group carp by 1 to 162 (carpdev)
add net 5.145.142.192/26: gatewacarp: carp1 demoted group carp by 1 to 163 (carpdev)
y 5.145.142.10
carp: carp2 demoted group carp by 1 to 164 (carpdev)
reordering libraries:carp0: state transition: INIT -> BACKUP
carp: carp0 demoted group carp by -1 to 163 (carpdev)
carp: carp0 demoted group external by -1 to 0 (carpdev)
carp: carp0 demoted group externalcarp by -1 to 0 (carpdev)
carp: carp0 demoted group egress by -1 to 0 (carpdev)
carp1: state transition: INIT -> BACKUP
carp: carp1 demoted group carp by -1 to 162 (carpdev)
carp: carp1 demoted group internal by -1 to 0 (carpdev)
carp2: state transition: INIT -> BACKUP
carp: carp2 demoted group carp by -1 to 161 (carpdev)
carp: carp2 demoted group yellow by -1 to 0 (carpdev)
done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
running rc.sysmerge
===> Updating /etc/fbtab
===> Updating /etc/login.conf
===> Updating /etc/ssl/cert.pem
===> Updating /etc/X11/xenodm/GiveConsole
===> Updating /etc/X11/xenodm/TakeConsole
===> Updating /var/unbound/etc/unbound.conf
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Path to firmware: http://firmware.openbsd.org/firmware/6.9/
Updating: intel-firmware-20200616v0 inteldrm-firmware-20200421 vmm-firmware-1.11.0p3
http://firmware.openbsd.org/firmware/6.9/: ftp: firmware.openbsd.org: no address associated with name
http://firmware.openbsd.org/firmware/6.9/: empty
Couldn't find updates for intel-firmware-20200616v0 inteldrm-firmware-20200421 vmm-firmware-1.11.0p3
Checking for available binary patches...
syspatch: cdn.openbsd.org: no address associated with name
starting package daemons: ${pkg_scripts}(absent) zabbix_agentd dnsmasq.
starting local daemons: apmd cron.
Sun May 16 11:57:56 CEST 2021
OpenBSD/amd64 (redgatea.red.aixigo.de) (tty00)
login: stopping package daemons: dnsmasq zabbix_agentd.
syncing disks... done
carp: carp0 demoted group carp by 1 to 1 (carpdev)
carp: carp0 demoted group external by 1 to 1 (carpdev)
carp: carp0 demoted group externalcarp by 1 to 1 (carpdev)
carp: carp0 demoted group egress by 1 to 1 (carpdev)
carp: carp1 demoted group carp by 1 to 2 (carpdev)
carp: carp1 demoted group internal by 1 to 1 (carpdev)
carp: carp2 demoted group carp by 1 to 3 (carpdev)
carp: carp2 demoted group yellow by 1 to 1 (carpdev)
rebooting...
1921923121919192119 39
939311219 19219
91 319 39
21
ÚBBBBðB"BBBÂBBBBBBÂ>> OpenBSD/amd64 BOOT 3.53
boot>
booting hd0a:/bsd: 14411048+3220496+340000+0+1175552 [1018992+128+1145856+866050]=0x15293f8
entry point at 0xffffffff81001000
[ using 3032056 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.9 (GENERIC.MP) #473: Mon Apr 19 10:40:28 MDT 2021
real mem = 8478871552 (8086MB)
avail mem = 8206520320 (7826MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0: vendor American Megatrends Inc. version "5.11" date 04/08/2016
bios0: Default string Default string
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
acpi0: wakeup devices BRC1(S0) XHC1(S4) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicmos0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
"INTCF1C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C0B" at acpi0 not configured
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: CLK0, resource for CAMD
acpipwrres2 at acpi0: CLK0, resource for CAM1
acpipwrres3 at acpi0: CLK1, resource for CAM2, CAM3
acpipwrres4 at acpi0: USBC, resource for XHC1
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 95 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
drm0 at inteldrm0
inteldrm0: msi, CHERRYVIEW, gen 8
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, Hitachi HTS54252, BBDO> naa.5000cca532c0fb69
sd0: 190782MB, 512 bytes/sector, 390721968 sectors
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:8f
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:90
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:91
ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05
pci5 at ppb4 bus 5
ppb5 at pci5 dev 1 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci6 at ppb5 bus 6
em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:92
ppb6 at pci5 dev 2 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci7 at ppb6 bus 7
em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:93
ppb7 at pci5 dev 3 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci8 at ppb7 bus 8
em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:60:e0:66:70:94
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay at vga0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1b53344a3fd48897.a) swap on sd0b dump on sd0b
uvm_fault(0xffffffff821392c0, 0xb8, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at i915_ggtt_pin+0x29: movq 0xb8(%rdi),%r12
ddb{0}> trace
i915_ggtt_pin(0,10000,20) at i915_ggtt_pin+0x29
gen6_ppgtt_pin(ffff80000061fc00) at gen6_ppgtt_pin+0x7c
__intel_context_do_pin(fffffd827ae43d80) at __intel_context_do_pin+0xca
intel_engines_init(ffff80000010bc38) at intel_engines_init+0x4b5
intel_gt_init(ffff80000010bc38) at intel_gt_init+0x130
i915_gem_init(ffff800000107000) at i915_gem_init+0xa3
i915_driver_probe(ffff800000107000,ffffffff81fc7810) at i915_driver_probe+0x7ed
inteldrm_attachhook(ffff800000107000) at inteldrm_attachhook+0x43
config_process_deferred_mountroot() at config_process_deferred_mountroot+0x6b
main(0) at main+0x733
end trace frame: 0x0, count: -10
ddb{0}> show registers
rdi 0
rsi 0x10000 __ALIGN_SIZE+0xf000
rbp 0xffffffff82530bb0 end+0x130bb0
rbx 0xffff800000645340
rdx 0x20
rcx 0xffffffff82138924 proc0+0x4
rax 0
r8 0x11
r9 0xffffffff820ba450 rw_ops+0x10
r10 0xffffffffffffffff
r11 0x5d60aabbc1c6285e
r12 0xfffffffc
r13 0xfffffffc
r14 0xffff80000061fc00
r15 0x20
rip 0xffffffff817c3f89 i915_ggtt_pin+0x29
cs 0x8
rflags 0x10286 __ALIGN_SIZE+0xf286
rsp 0xffffffff82530b50 end+0x130b50
ss 0x10
i915_ggtt_pin+0x29: movq 0xb8(%rdi),%r12

Antonino Sidoti

2021-05-16 22:27:25 UTC

Permalink

Hi,

I also have this issue on a fresh install of 6.9 amd64. I reported it as a bug last week to “bugs” mail list with all appropriate information. I can confirm that plugging in a monitor will allow my system to boot. I did not have the 001 patch installed.

Antonino Sidoti

Post by Jonathan Gray

Post by Harald Dunkel
And another attempt, see attachment.
Seems I have to power cycle to make it boot.

There have been a few reports of this in the last few weeks.
An initial workaround patch is in
https://marc.info/?l=openbsd-bugs&m=162012367130138&w=2
If you can plug in a display does this still occur afterwards?

Harald Dunkel

2021-05-27 05:57:28 UTC

Permalink

Post by Antonino Sidoti
Hi,
I also have this issue on a fresh install of 6.9 amd64. I reported it as a bug last week to “bugs” mail list with all appropriate information. I can confirm that plugging in a monitor will allow my system to boot. I did not have the 001 patch installed.

I have sent a metoo on this list, but there was no response.

If OpenBSD becomes unreliable on such basic tasks as a reboot
after installing the most recent security patches, this won't
make OpenBSD more popular.

Regards
Harri

Jonathan Gray

2021-05-27 06:18:45 UTC

Permalink

Post by Harald Dunkel

I have sent a metoo on this list, but there was no response.

Here is the mail you were both sent:

https://marc.info/?l=openbsd-bugs&m=162123695228236&w=2

If no one tries patches and no fix is found there can be no syspatch.

Continue reading on narkive:

Search results for '6.9 + 001: uvm_fault' (Questions and Answers)

replies

Why are most americans so politically ignorant?

started 2011-08-10 19:03:39 UTC

politics

replies

I cant believe my bf?????????????

started 2006-10-10 14:51:13 UTC

singles & dating

replies

He does not get it????????